AI Chatbots and Assistants

Explore the best AI Chatbots and Assistants — independent reviews, comparisons, pricing and step-by-step how-to guides, curated by Aizhi.

  • Hierarchical Risk Parity

    Hierarchical Risk Parity

    Hierarchical Risk Parity (HRP) is an advanced investment portfolio optimization framework developed in 2016 by Marcos López de Prado at Guggenheim Partners and Cornell University. HRP is a probabilistic graph-based alternative to the prevailing mean-variance optimization (MVO) framework developed by Harry Markowitz in 1952, and for which he received the Nobel Prize in economic sciences. HRP algorithms apply discrete mathematics and machine learning techniques to create diversified and robust investment portfolios that outperform MVO methods out-of-sample. HRP aims to address the limitations of traditional portfolio construction methods, particularly when dealing with highly correlated assets. Following its publication, HRP has been implemented in numerous open-source libraries, and received multiple extensions. == Key features == HRP portfolios have been proposed as a robust alternative to traditional quadratic optimization methods, including the Critical Line Algorithm (CLA) of Markowitz. HRP addresses three central issues commonly associated with quadratic optimizers: numerical instability, excessive concentration in a small number of assets, and poor out-of-sample performance. HRP leverages techniques from graph theory and machine learning to construct diversified portfolios using only the information embedded in the covariance matrix. Unlike quadratic programming methods, HRP does not require the covariance matrix to be invertible. Consequently, HRP remains applicable even in cases where the covariance matrix is ill-conditioned or singular—conditions under which standard optimizers fail. Monte Carlo simulations indicate that HRP achieves lower out-of-sample variance than CLA, despite the fact that minimizing variance is the explicit optimization objective of CLA. Furthermore, HRP portfolios exhibit lower realized risk compared to those generated by traditional risk parity methodologies. Empirical backtests have demonstrated that HRP would have historically outperformed conventional portfolio construction techniques. Algorithms within the HRP framework are characterized by the following features: Machine Learning Approach: HRP employs hierarchical clustering, a machine learning technique, to group similar assets based on their correlations. This allows the algorithm to identify the underlying hierarchical structure of the portfolio, and avoid that errors spread through the entire network. Risk-Based Allocation: The algorithm allocates capital based on risk, ensuring that assets only compete with similar assets for representation in the portfolio. This approach leads to better diversification across different risk sources, while avoiding the instability associated with noisy returns estimates. Covariance Matrix Handling: Unlike traditional methods like Mean-Variance Optimization, HRP does not require inverting the covariance matrix. This makes it more stable and applicable to portfolios with a large number of assets, particularly when the covariance matrix's condition number is high. == The problem: Markowitz's Curse == Portfolio construction is perhaps the most recurrent financial problem. On a daily basis, investment managers must build portfolios that incorporate their views and forecasts on risks and returns. Despite the theoretical elegance of Markowitz's mean-variance framework, its practical implementation is hindered by several limitations that undermine the reliability of solutions derived from the Critical Line Algorithm (CLA). A principal concern is the high sensitivity of optimal portfolios to small perturbations in expected returns: even minor forecasting errors can result in significantly different allocations (Michaud, 1998). Given the inherent difficulty of producing accurate return forecasts, numerous researchers have advocated for approaches that forgo expected returns entirely and instead rely solely on the covariance structure of asset returns. This has given rise to risk-based allocation methods, among which risk parity is a widely cited example (Jurczenko, 2015). While eliminating return forecasts mitigates some instability, it does not eliminate it. Quadratic programming techniques employed in portfolio optimization require the inversion of a positive-definite covariance matrix, meaning all eigenvalues must be strictly positive. When the matrix is numerically ill-conditioned—that is, when the ratio of its largest to smallest eigenvalue (its condition number) is large—matrix inversion becomes unreliable and prone to significant numerical errors (Bailey and López de Prado, 2012). The condition number of a covariance, correlation, or any symmetric (and thus diagonalizable) matrix is defined as the absolute value of the ratio between its largest and smallest eigenvalues in modulus. The figure on the right presents the sorted eigenvalues of several correlation matrices; the condition number is represented by the ratio of the first to last eigenvalues in each sequence. A diagonal correlation matrix, which is equal to its own inverse, exhibits the minimum possible condition number. As the number of correlated (or multicollinear) assets in a portfolio increases, the condition number rises. At high levels, this leads to severe numerical instability, whereby slight modifications in any matrix entry may result in drastically different inverses. This phenomenon, often referred to as Markowitz’s curse, encapsulates the paradox wherein increased correlation among assets heightens the theoretical need for diversification, yet simultaneously increases the likelihood of unstable optimization outcomes. Consequently, the potential benefits of diversification are frequently overshadowed by estimation errors. These problems are exacerbated as the dimensionality of the covariance matrix increases. The estimation of each covariance term consumes degrees of freedom, and in general, a minimum of 1 2 N ( N + 1 ) {\displaystyle {\frac {1}{2}}N(N+1)} independent and identically distributed (IID) observations is required to estimate a non-singular covariance matrix of dimension N {\displaystyle N} . For example, constructing an invertible covariance matrix of dimension 50 necessitates at least five years of daily IID observations. However, empirical evidence suggests that the correlation structure of financial assets is highly unstable over such extended periods. These difficulties are highlighted by the observation that even naïve allocation strategies—such as equally weighted portfolios—have frequently outperformed both mean-variance and risk-based optimizations in out-of-sample tests (De Miguel et al., 2009). == The solution: Hierarchical Risk Parity == The HRP algorithm addresses Markowitz's curse in three steps: Hierarchical Clustering: Assets are grouped into clusters based on their correlations, forming a hierarchical tree structure. Quasi-Diagonalization: The correlation matrix is reordered based on the clustering results, revealing a block diagonal structure. Recursive Bisection: Weights are assigned to assets through a top-down approach, splitting the portfolio into smaller sub-portfolios and allocating capital based on inverse variance. === Step 1: Hierarchical clustering === Given a T × N {\displaystyle T\times N} matrix of asset returns X {\displaystyle X} , where each column represents a time series of returns for one of N {\displaystyle N} assets over T {\displaystyle T} time periods, a hierarchical clustering process can be used to construct a tree-based representation of asset relationships. First, we compute the N × N {\displaystyle N\times N} correlation matrix ρ = ρ i , j i , j = 1 . . . N {\displaystyle \rho ={\rho _{i,j}}\;{i,j=1\;...\;N}} , where ρ i , j = c o r r ( X i , X j ) {\displaystyle \rho _{i,j}=\mathrm {corr} (X_{i},X_{j})} . From this, a pairwise distance matrix D = d i , j {\displaystyle D={d_{i,j}}} is defined using the transformation: d i , j = 1 2 ( 1 − ρ i , j ) {\displaystyle d_{i,j}={\sqrt {{\frac {1}{2}}(1-\rho _{i,j})}}} This distance function defines a proper metric space, satisfying non-negativity, identity of indiscernibles, symmetry, and the triangle inequality. Next, a secondary distance matrix D ~ = d ~ i , j {\displaystyle {\tilde {D}}={{\tilde {d}}_{i,j}}} is computed, where each entry measures the Euclidean distance between the distance profiles of two assets: d ~ i , j = ∑ n = 1 N ( d n , i − d n , j ) 2 {\displaystyle {\tilde {d}}_{i,j}={\sqrt {\sum _{n=1}^{N}(d_{n,i}-d_{n,j})^{2}}}} While d i , j {\displaystyle d_{i,j}} reflects correlation-based proximity between two assets, d ~ i , j {\displaystyle {\tilde {d}}_{i,j}} quantifies dissimilarity across the entire system, as it depends on all pairwise distances. Hierarchical clustering proceeds by identifying the pair ( i , j ) {\displaystyle (i,j)} with the smallest value of d ~ i , j {\displaystyle {\tilde {d}}_{i,j}} (for i ≠ j {\displaystyle i\neq j} ), and forming a new cluster u [ 1 ] = ( i , j ) {\displaystyle u[1]=(i,j)} .

    Read more →
  • Foodsi

    Foodsi

    Foodsi is a Polish mobile application that connects customers with restaurants, convenience stores, bakeries and cafes that have a surplus of food, allowing its users to buy the surplus at a reduced price. The service launched in 2019 in Warsaw and has expanded to other major cities in Poland. In 2023, a new feature was introduced in the app, allowing users to buy packages not only with self-pickup but also with delivery. The products range has also been expanded to include unsold magazines, cosmetics or plants. == History == The company was created in 2019 in Poland by Mateusz Kowalczyk and Jakub Fryszczyn. During studies in their home country and abroad, when they made a living working in restaurants and bakeries, they recognized the problem and the scale of food waste. They launched the application by themselves, having previously raised PLN 100,000 on their own for the purpose. Initially, Foodsi was an Android-only app, but over time, an IOS version was developed. In 2022, the startup raised PLN 6 million in a seed round from VC companies including CofounderZone and Status Starter, as well as private investors such as founders of Pyszne.pl. As of December 2023, it claimed more than 5000 businesses, serving over 1,5 million users, have saved nearly 3 million bags of food. == Purpose == Foodsi aims to significantly reduce food waste, which contributes to the Sustainable Development Goals. The application bridges the gap between the customers who are looking for shopping deals and the companies that want to reduce surplus products but are unable to sell them at a normal price. This allows the customers to buy unsold products for as little as 30% of the normal price. The company claims that every 4 out of 5 packages are sold on average. As of 2019 Foodsi employed more than 30 people. By 2024 it was more than 50. For now, Foodsi operates in major Polish cities such as Warsaw, Kraków, Trójmiasto, Wrocław, Poznań etc. However, in the upcoming years, Foodsi plans to expand to other countries. == Use == To start selling surplus, a company must leave Foodsi its contact information to register in the system. Registration in the app is completely free of charge. Then, companies offer available packages anticipating what won’t be sold and post them in the app along with the price so that users can buy them and pick them up. Companies can put their packages in the app at any time during the day. Users can pick up packages from bakeries, grocery stores, restaurants, but also florists and beauty stores. Foodsi charges a small commission on each package from the cooperating companies. If a user wants to start ordering packages from Foodsi, he or she needs to install the app on their mobile phone (Android or IOS) and register an account. The app displays a list of restaurants and other venues available in a specific region set by the user's location. Customers can see the price, address, distance and time range for package pickup. Packages are usually in the form of so-called 'surprise-packages', meaning that customers do not know specifically what kind of food/product will be inside. Some restaurants offer a choice of different package sizes. Prices are up to 70% lower than those of the original products. Customers have to show up at the restaurant to pick up the package using their phone at a time specified in the app. == Awards == Auler All-Stars 2025 - 3rd place Deloitte Technology Fast 50 - 2025 Central Europe Executive Club - Innowacja Roku: Żywność i Rolnictwo - Wyróżnienie (2025) Stena Circular Economy Award - Lider Gospodarki Obiegu Zamkniętego (2025) - wyróżnienie w kategorii start-up wdrażający GOZ na rynku polskim 255th place in the international poll FoodTech 500 2025 Finalist for the EY Entrepreneur Of The Year™ 2025 Wpływowi 2024 - Laureat w kategorii “Zrównoważony rozwój” Supplier of the Year 2024 - XXII Food & Business Forum Supplier of the Year 2024 - VII Sweets & Coffee Forum Innovative Leader 2024 - Leader in Food / Food-Tech Category - Executive Summit “Orzeł Innowacji - Start-up z potencjałem Polska-Świat” (Rzeczpospolita, 2024) 102nd place in the international poll FoodTech 500 2024 Auler 2023 Startup of the Year 2023 according to money.pl Start(up) w zrównoważoną przyszłość Kongresu Kompas ESG 2023 Marka Godna Zaufania according to My Company Polska 2023 184th place in the international poll FoodTech 500 2023 In 2023, Foodsi co-founder Mateusz Kowalczyk was recognized by Forbes magazine and included in its "30 before 30" list.

    Read more →
  • Software bot

    Software bot

    A software bot is a type of software agent in the service of software project management and software engineering. A software bot has an identity and potentially personified aspects in order to serve their stakeholders. Software bots often compose software services and provide an alternative user interface, which is sometimes, but not necessarily conversational. Software bots are typically used to execute tasks, suggest actions, engage in dialogue, and promote social and cultural aspects of a software project. The term bot is derived from robot. However, robots act in the physical world and software bots act only in digital spaces. Some software bots are designed and behave as chatbots, but not all chatbots are software bots. Discussions about the past and future of software bots show that software bots have been adopted for many years. == Usage == Software bots are used to support development activities, such as communication among software developers and automation of repetitive tasks. Software bots have been adopted by several communities related to software development, such as open-source communities on GitHub and Stack Overflow. GitHub bots have user accounts and can open, close, or comment on pull requests and issues. GitHub bots have been used to assign reviewers, ask contributors to sign the Contributor License Agreement, report continuous integration failures, review code and pull requests, welcome newcomers, run automated tests, merge pull requests, fix bugs and vulnerabilities, etc. The Slack tool includes an API for developing software bots. There are slack bots for keeping track of todo lists, coordinating standup meetings, and managing support tickets. The ChatBot company products further simplify the process of creating a custom Slack bot. On Wikipedia, Wikipedia bots automate a variety of tasks, such as creating stub articles, consistently updating the format of multiple articles, and so on. Bots like ClueBot NG are capable of recognizing vandalism and automatically remove disruptive content. == Taxonomies and Classification Frameworks == Lebeuf et al. provide a faceted taxonomy to characterize bots based on a literature review. It is composed of 3 main facets: (i) properties of the environment that the bot was created in; (ii) intrinsic properties of the bot itself; and (iii) the bot's interactions within its environment. They further detail the facets into sets of sub-facets under each of the main facets. Paikari and van der Hoek defined a set of dimensions to enable comparison of software bots, applied specifically to chatbots. It resulted in six dimensions: Type: the main purpose of the bot (information, collaboration, or automation) Direction of the "conversation" (input, output, or bi-directional) Guidance (human-mediated, or autonomous) Predictability (deterministic, or evolving) Interaction style (dull, alternate vocabulary, relationship-builder, human-like) Communication channel (text, voice, or both) Erlenhov et al. raised the question of the difference between a bot and simple automation, since much research done in the name of software bots uses the term bot to describe various different tools and sometimes things are "just" plain old development tools. After interviewing and surveying over 100 developers the authors found that not one, but three definitions dominated the community. They created three personas based on these definitions and the difference between what the three personas see as being a bot is mainly the association with a different set of human-like traits. The chat bot persona (Charlie) primarily thinks of bots as tools that communicates with the developer through a natural language interface (typically voice or chat), and caring little about what tasks the bot is used for or how it actually implements these tasks. The autonomous bot persona (Alex) thinks of bots as tools that work on their own (without requiring much input from a developer) on a task that would normally be done by a human. The smart bot persona (Sam) separates bots and plain old development tools through how smart (technically sophisticated) a tool is. Sam cares less about how the tool communicates, but more about if it is unusually good or adaptive at executing a task. The authors recommends that people doing research or writing about bots try to put their work in the context of one of the personas since the personas have different expectations and problems with the tools. == Example of notable bots == Dependabot and Renovatebot update software dependencies and detect vulnerabilities. (https://dependabot.com/) Probot is an organization that create and maintain bots for GitHub. The example bots using Probot are the following. Auto Assign (https://probot.github.io/apps/auto-assign/) license bot (https://probot.github.io/) Sentiment bot (https://probot.github.io/apps/sentiment-bot/) Untrivializer bot (https://probot.github.io/apps/untrivializer/) Refactoring-Bot (Refactoring-Bot): provides refactoring based on static code analysis Looks good to me bot (LGTM) is a Semmle product that inspects pull requests on GitHub for code style and unsafe code practices. == Issues and threats == Software bots may not be well accepted by humans. A study from the University of Antwerp has compared how developers active on Stack Overflow perceive answers generated by software bots. They find that developers perceive the quality of software bot-generated answers to be significantly worse if the identity of the software bot is made apparent. By contrast, answers from software bots with human-like identity were better received. In practice, when software bots are used on platforms like GitHub or Wikipedia, their username makes it clear that they are bots, e.g., DependaBot, RenovateBot, DatBot, SineBot. Bots may be subject to special rules. For instance, the GitHub terms of service does not allow 'bots' but accepts 'machine account', where a 'machine account' has two properties: 1) a human takes full responsibility of the bot's actions 2) it cannot create other accounts.

    Read more →
  • Web application

    Web application

    A web application (or web app) is application software that is created with web technologies and runs via a web browser. Web applications emerged during the late 1990s and allowed for the server to dynamically build a response to the request, in contrast to static web pages. Web applications are commonly distributed via a web server. There are several different tier systems that web applications use to communicate between the web browsers, the client interface, and server data. Each system has its own uses as they function in different ways. However, there are many security risks that developers must be aware of during development; proper measures to protect user data are vital. Web applications are often constructed with the use of a web application framework. Single-page applications (SPAs) and progressive web apps (PWAs) are two architectural approaches to creating web applications that provide a user experience similar to native apps, including features such as smooth navigation, offline support, and faster interactions. Web applications are often fully hosted on remote cloud services, can require a constant connection to them, and can replace conventional desktop applications for operating systems such as Microsoft Windows, thus facilitating the operation of software as a service as it grants the developer the power to tightly control billing based on use of the remote services as well as vendor lock-in by hosting data remotely. Modern browsers such as Chrome offer sandboxing for every browser tab which improves security and restricts access to local resources. No software installation is required as the app runs within the browser which reduces the need for managing software installations. With the use of remote cloud services, customers do not need to manage servers as that can be left to the developer and the cloud service and can use the software with a relatively low power, low-resource PC such as a thin client. The source code of the application can stay the same across operating systems and devices of users with the use of responsive web design, since it only needs to be compatible with web browsers which adhere to web standards, making the code highly portable and saving on development time. Numerous JavaScript frameworks and CSS frameworks facilitate development. == History == The concept of a "web application" was first introduced in the Java language in the Servlet Specification version 2.2, which was released in 1999. At that time, both JavaScript and XML had already been developed, but the XMLHttpRequest object had only been recently introduced on Internet Explorer 5 as an ActiveX object. Beginning around the early 2000s, applications such as "Myspace (2003), Gmail (2004), Digg (2004), [and] Google Maps (2005)," started to make their client sides more and more interactive. A web page script is able to contact the server for storing/retrieving data without downloading an entire web page. The practice became known as Ajax in 2005. Eventually this was replaced by web APIs using JSON, accessed via JavaScript asynchronously on the client side. In earlier computing models like client-server, the processing load for the application was shared between code on the server and code installed on each client locally. In other words, an application had its own pre-compiled client program which served as its user interface and had to be separately installed on each user's personal computer. An upgrade to the server-side code of the application would typically also require an upgrade to the client-side code installed on each user workstation, adding to the support cost and decreasing productivity. Additionally, both the client and server components of the application were bound tightly to a particular computer architecture and operating system, which made porting them to other systems prohibitively expensive for all but the largest applications. Later, in 1995, Netscape introduced the client-side scripting language called JavaScript, which allowed programmers to add dynamic elements to the user interface that ran on the client side. Essentially, instead of sending data to the server in order to generate an entire web page, the embedded scripts of the downloaded page can perform various tasks such as input validation or showing/hiding parts of the page. "Progressive web apps", the term coined by designer Frances Berriman and Google Chrome engineer Alex Russell in 2015, refers to apps taking advantage of new features supported by modern browsers, which initially run inside a web browser tab but later can run completely offline and can be launched without entering the app URL in the browser. == Structure == Traditional PC applications are typically single-tiered, residing solely on the client machine. In contrast, web applications inherently facilitate a multi-tiered architecture. Though many variations are possible, the most common structure is the three-tiered application. In its most common form, the three tiers are called presentation, application and storage. The first tier, presentation, refers to a web browser itself. The second tier refers to any engine using dynamic web content technology (such as ASP, CGI, ColdFusion, Dart, JSP/Java, Node.js, PHP, Python or Ruby on Rails). The third tier refers to a database that stores data and determines the structure of a user interface. Essentially, when using the three-tiered system, the web browser sends requests to the engine, which then services them by making queries and updates against the database and generates a user interface. The 3-tier solution may fall short when dealing with more complex applications, and may need to be replaced with the n-tiered approach; the greatest benefit of which is how business logic (which resides on the application tier) is broken down into a more fine-grained model. Another benefit would be to add an integration tier, which separates the data tier and provides an easy-to-use interface to access the data. For example, the client data would be accessed by calling a "list_clients()" function instead of making an SQL query directly against the client table on the database. This allows the underlying database to be replaced without making any change to the other tiers. There are some who view a web application as a two-tier architecture. This can be a "smart" client that performs all the work and queries a "dumb" server, or a "dumb" client that relies on a "smart" server. The client would handle the presentation tier, the server would have the database (storage tier), and the business logic (application tier) would be on one of them or on both. While this increases the scalability of the applications and separates the display and the database, it still does not allow for true specialization of layers, so most applications will outgrow this model. == Security == Security breaches on these kinds of applications are a major concern because it can involve both enterprise information and private customer data. Protecting these assets is an important part of any web application, and there are some key operational areas that must be included in the development process. This includes processes for authentication, authorization, asset handling, input, and logging and auditing. Building security into the applications from the beginning is sometimes more effective and less disruptive in the long run. == Development == Writing web applications is simplified with the use of web application frameworks. These frameworks facilitate rapid application development by allowing a development team to focus on the parts of their application which are unique to their goals without having to resolve common development issues such as user management. In addition, there is potential for the development of applications on Internet operating systems, although currently there are not many viable platforms that fit this model.

    Read more →
  • Ray tracing (graphics)

    Ray tracing (graphics)

    In 3D computer graphics, ray tracing is a technique for modeling light transport for use in a wide variety of rendering algorithms for generating digital images. On a spectrum of computational cost and visual fidelity, ray tracing-based rendering techniques, such as ray casting, recursive ray tracing, distribution ray tracing, photon mapping and path tracing, are generally slower and higher fidelity than scanline rendering methods. Thus, ray tracing was first deployed in applications where taking a relatively long time to render could be tolerated, such as still CGI images, and film and television visual effects (VFX), but was less suited to real-time applications such as video games, where speed is critical in rendering each frame. Since 2018, however, hardware acceleration for real-time ray tracing has become standard on new commercial graphics cards, and graphics APIs have followed suit, allowing developers to use hybrid ray tracing and rasterization-based rendering in games and other real-time applications with a lesser hit to frame render times. Ray tracing is capable of simulating a variety of optical effects, such as reflection, refraction, soft shadows, scattering, depth of field, motion blur, caustics, ambient occlusion and dispersion phenomena (such as chromatic aberration). It can also be used to trace the path of sound waves in a similar fashion to light waves, making it a viable option for more immersive sound design in video games by rendering realistic reverberation and echoes. In fact, any physical wave or particle phenomenon with approximately linear motion can be simulated with ray tracing. Ray tracing–based rendering techniques that sample light over a domain typically generate multiple rays and often rely on denoising to reduce the resulting noise. == History == The idea of ray tracing comes from as early as the 16th century, when it was described by Albrecht Dürer, who is credited for its invention. Dürer described multiple techniques for projecting 3-D scenes onto an image plane. Some of these project chosen geometry onto the image plane, as is done with rasterization today. Others determine what geometry is visible along a given ray, as is done with ray tracing. Using a computer for ray tracing to generate shaded pictures was first accomplished by Arthur Appel in 1968. Appel used ray tracing for primary visibility (determining the closest surface to the camera at each image point) by tracing a ray through each point to be shaded into the scene to identify the visible surface. The closest surface intersected by the ray was the visible one. This non-recursive ray tracing-based rendering algorithm is today called "ray casting". His algorithm then traced secondary rays to the light source from each point being shaded to determine whether the point was in shadow or not. Later, in 1971, Goldstein and Nagel of MAGI (Mathematical Applications Group, Inc.) published "3-D Visual Simulation", wherein ray tracing was used to make shaded pictures of solids. At the ray-surface intersection point found, they computed the surface normal and, knowing the position of the light source, computed the brightness of the pixel on the screen. Their publication describes a short (30-second) film "made using the University of Maryland's display hardware outfitted with a 16mm camera. The film showed the helicopter and a simple ground-level gun emplacement. The helicopter was programmed to undergo a series of maneuvers including turns, take-offs, and landings, etc., until it eventually is shot down and crashed." A CDC 6600 computer was used. MAGI produced an animation video called MAGI/SynthaVision Sampler in 1974. Another early instance of ray casting came in 1976, when Scott Roth created a flip book animation in Bob Sproull's computer graphics course at Caltech. The scanned pages are shown as a video in the accompanying image. Roth's computer program noted an edge point at a pixel location if the ray intersected a bounded plane different from that of its neighbors. Of course, a ray could intersect multiple planes in space, but only the surface point closest to the camera was noted as visible. The platform was a DEC PDP-10, a Tektronix storage-tube display, and a printer which would create an image of the display on rolling thermal paper. Roth extended the framework, introduced the term ray casting in the context of computer graphics and solid modeling, and in 1982 published his work while at GM Research Labs. Turner Whitted was the first to show recursive ray tracing for mirror reflection and for refraction through translucent objects, with an angle determined by the solid's index of refraction, and to use ray tracing for anti-aliasing. Whitted also showed ray traced shadows. He produced a recursive ray traced film called The Compleat Angler in 1979 while an engineer at Bell Labs. Whitted's deeply recursive ray tracing algorithm reframed rendering from being primarily a matter of surface visibility determination to being a matter of light transport. His paper inspired a series of subsequent work by others that included distribution ray tracing and finally unbiased path tracing, which provides the rendering equation framework that has allowed computer-generated imagery to be faithful to reality. For decades, global illumination in major films using computer-generated imagery was approximated with additional lights. Ray tracing-based rendering eventually changed that by enabling physically based light transport. Early feature films rendered entirely using path tracing include Monster House (2006), Cloudy with a Chance of Meatballs (2009), and Monsters University (2013). == Algorithm overview == Optical ray tracing describes a method for producing visual images constructed in 3D computer graphics environments, with more photorealism than either ray casting or scanline rendering techniques. It works by tracing a path from an imaginary eye through each pixel in a virtual screen, and calculating the color of the object visible through it. Scenes in ray tracing are described mathematically by a programmer or by a visual artist (normally using intermediary tools). Scenes may also incorporate data from images and models captured by means such as digital photography. Typically, each ray must be tested for intersection with some subset of all the objects in the scene. Once the nearest object has been identified, the algorithm will estimate the incoming light at the point of intersection, examine the material properties of the object, and combine this information to calculate the final color of the pixel. Certain illumination algorithms and reflective or translucent materials may require more rays to be re-cast into the scene. It may at first seem counterintuitive or "backward" to send rays away from the camera, rather than into it (as actual light does in reality), but doing so is many orders of magnitude more efficient. Since the overwhelming majority of light rays from a given light source do not make it directly into the viewer's eye, a "forward" simulation could potentially waste a tremendous amount of computation on light paths that are never recorded. Therefore, the shortcut taken in ray tracing is to presuppose that a given ray intersects the view frame. After either a maximum number of reflections or a ray traveling a certain distance without intersection, the ray ceases to travel and the pixel's value is updated. === Calculate rays for rectangular viewport === On input we have (in calculation we use vector normalization and cross product): E ∈ R 3 {\displaystyle E\in \mathbb {R^{3}} } eye position T ∈ R 3 {\displaystyle T\in \mathbb {R^{3}} } target position θ ∈ [ 0 , π ] {\displaystyle \theta \in [0,\pi ]} field of view - for humans, we can assume ≈ π / 2 rad = 90 ∘ {\displaystyle \approx \pi /2{\text{ rad}}=90^{\circ }} m , k ∈ N {\displaystyle m,k\in \mathbb {N} } numbers of square pixels on viewport vertical and horizontal direction i , j ∈ N , 1 ≤ i ≤ k ∧ 1 ≤ j ≤ m {\displaystyle i,j\in \mathbb {N} ,1\leq i\leq k\land 1\leq j\leq m} numbers of actual pixel v → ∈ R 3 {\displaystyle {\vec {v}}\in \mathbb {R^{3}} } vertical vector which indicates where is up and down, usually v → = [ 0 , 1 , 0 ] {\displaystyle {\vec {v}}=[0,1,0]} - roll component which determine viewport rotation around point C (where the axis of rotation is the ET section) The idea is to find the position of each viewport pixel center P i j {\displaystyle P_{ij}} which allows us to find the line going from eye E {\displaystyle E} through that pixel and finally get the ray described by point E {\displaystyle E} and vector R → i j = P i j − E {\displaystyle {\vec {R}}_{ij}=P_{ij}-E} (or its normalization r → i j {\displaystyle {\vec {r}}_{ij}} ). First we need to find the coordinates of the bottom left viewport pixel P 1 m {\displaystyle P_{1m}} and find the next pixel by making a shift along directions parallel to viewport (vectors b → n {\displaystyle {\vec {b}}_{n

    Read more →
  • CEITON

    CEITON

    CEITON is a web-based software system for facilitating and automating business processes such as planning, scheduling, and payroll using workflow technologies. The system is used by several media companies such as MDR, Yle, RAI and Red Bull Media House. In December 2018, the first CEITON User Group Meeting took place in Leipzig, Germany. == Architecture == The software runs on a server (on premises) or in the cloud and is scalable on parallel servers. Data security is warranted by role-based access control (RBAC). The software is used via web-browsers and not dependent on particular system software. == Structure and Features == CEITON combines the two classical approaches of production planning and control and workflow management. === Project Management === The scheduling system plans, manages, bills, and analyzes projects or tasks. It manages human and technical resources, material, and locations on a single GUI. The system uses a gantt chart to assign tasks to be done to available and eligible resources (i.e. staff), automatically or by drag-and-drop. The scheduling module includes material management, resource management/ human resource management, integration of freelancers, clients and suppliers, long-term budget planning, time-tracking, shift scheduling, quality management, delivery and logistics, document management, archive, analysis and controlling, business reporting, as well as all accounting and documentation processes. === Workflow === The workflow management system module coordinates business processes. Processes are defined once as a workflow and then repeatedly executed. Human resources are automatically assigned to steps (tasks) and integrated in workflow forms. Systems are integrated with an EAI/SOAP module, allowing data exchange with arbitrary external systems which are also involved in the business process. It also features a 3-D workflow overview in which the status of each project step can be determined by its color in the overview. === Process Management === For project and order processing management, business processes are designed as workflows, and coordinate communication automatically. Different user interfaces for staff, customers or suppliers can be created so each gets only relevant information. Different workflow forms are associated with different log-ins. The main application for the system is knowledge-based business processes, in which many people are involved and virtual results are produced, e.g. in research, or development of media products, such as TV and movies. Broadcasters and media companies such as MDR and Yle use CEITON to control their production processes for products and services and coordinate complex workflows with all kinds of resources. === Integrations === An integrated EAI module allows CEITON to integrate every external system in any business process without programming, using SOAP and similar technologies. Aspera and FileCatalyst were integrated for faster data transfer, yet complex ERP systems and numerous SAP modules have also been integrated, for example, to extract working times to payroll. === Mobile Working === Since Version 7, released in 2015, CEITON includes a time-tracking module allowing employees to enter their times from mobile devices such as tablets running Android, iPhones etc. == History == Ceiton Technologies (SME tech firm), the company developing CEITON, was founded in Leipzig, Germany in 2000, staffing solutions for the Bureau of Internal Revenue in Manila, Philippines, were implemented in 2000 together with the Deutsche Gesellschaft für Technische Zusammenarbeit of the German government. The first version (1.0) of the software was released in July 2001. The product was originally developed for German broadcasting companies. CEITON is named after the Japanese concept Seiton, one of the principles of Japanese workplace design methodology known as 5S. Since version 7, released in 2015, CEITON includes a time-tracking module allowing employees to enter their times from mobile devices such as tablets running Android, iPhones etc. In May 2005 CEITON won the IQ innovation award, sponsored by Siemens, in the category Excellent innovation in the IT-sector. Since 2007, CEITON has been present at the broadcast trade fairs NAB in Las Vegas and IBC in Amsterdam. In 2020, the company celebrated its 20th anniversary.

    Read more →
  • C-RAN

    C-RAN

    C-RAN (Cloud-RAN), also referred to as Centralized-RAN, is an architecture for cellular networks. C-RAN is a centralized, cloud computing-based architecture for radio access networks that supports 2G, 3G, 4G, 5G and future wireless communication standards. Its name comes from the four 'C's in the main characteristics of C-RAN system, "Clean, Centralized processing, Collaborative radio, and a real-time Cloud Radio Access Network". == Background == Traditional cellular, or Radio Access Networks (RAN), consist of many stand-alone base stations (BTS). Each BTS covers a small area, whereas a group BTS provides coverage over a continuous area. Each BTS processes and transmits its own signal to and from the mobile terminal, and forwards the data payload to and from the mobile terminal and out to the core network via the backhaul. Each BTS has its own cooling, back haul transportation, backup battery, monitoring system, and so on. Because of limited spectral resources, network operators 'reuse' the frequency among different base stations, which can cause interference between neighboring cells. There are several limitations in the traditional cellular architecture. First, each BTS is costly to build and operate. Moore's law helps reduce the size and power of an electrical system, but the supporting facilities of the BTS are not improved quite as well. Second, when more BTS are added to a system to improve its capacity, interference among BTS is more severe as BTS are closer to each other and more of them are using the same frequency. Third, because users are mobile, the traffic of each BTS fluctuates (called 'tide effect'), and as a result, the average utilization rate of individual BTS is pretty low. However, these processing resources cannot be shared with other BTS. Therefore, all BTS are designed to handle the maximum traffic, not average traffic, resulting in a waste of processing resources and power at idle times. == Evolution of base station architecture == === All-in-one macro base station === In the 1G and 2G cellular networks, base stations had an all-in-one architecture. Analog, digital, and power functions were housed in a single cabinet as large as a refrigerator. Usually the base station cabinet was placed in a dedicated room along with all necessary supporting facilitates such as power, backup battery, air conditioning, environment surveillance, and backhaul transmission equipment. The RF signal is generated by the base station RF unit and propagates through pairs of RF cables up to the antennas on the top of a base station tower or other mounting points. This all-in-one architecture was mostly found in macro cell deployments. === Distributed base station === For 3G, a distributed base station architecture was introduced by Ericsson, Nokia, Huawei, and other leading telecom equipment vendors. In this architecture the radio function unit, also known as the remote radio head (RRH), is separated from the digital function unit, or baseband unit (BBU) by fiber. Digital baseband signals are carried over fiber, using the Open Base Station Architecture Initiative (OBSAI) or Common Public Radio Interface (CPRI) standard. The RRH can be installed on the top of tower close to the antenna, reducing the loss compared to the traditional base station where the RF signal has to travel through a long cable from the base station cabinet to the antenna at the top of the tower. The fiber link between RRH and BBU also allows more flexibility in network planning and deployment as they can be placed a few hundred meters or a few kilometers away. Most modern base stations now use this decoupled architecture. === C-RAN/Cloud-RAN === C-RAN may be viewed as an architectural evolution of the above distributed base station system. It takes advantage of many technological advances in wireless, optical and IT communications systems. For example, it uses the latest CPRI standard, low cost Coarse or Dense Wavelength Division Multiplexing (CWDM/ DWDM) technology, and mmWave to allow transmission of baseband signal over long distance thus achieving large scale centralised base station deployment. It applies recent Data Centre Network technology to allow a low cost, high reliability, low latency and high bandwidth interconnect network in the BBU pool. It utilizes open platforms and real-time virtualization technology rooted in cloud computing to achieve dynamic shared resource allocation and support multi-vendor, multi-technology environments. == Architecture overview == C-RAN architecture has the following characteristics that are distinct from other cellular architectures: Large scale centralized deployment: Allows many RRHs to connect to a centralized BBU pool. The maximum distance can be 20km in fiber link for 4G (LTE/LTE-A) systems, and even longer distances (40~80km) for 3G (WCDMA/TD-SCDMA) and 2G (GSM/CDMA) systems. Native support to Collaborative Radio technologies: Any BBU can talk with any other BBU within the BBU pool with very high bandwidth (10 Gbit/s and above) and low latency (10 μs level). This is enabled by the interconnection of BBUs in the pool. This is one major difference from BBU Hotelling, or base station Hotelling; in the latter case, the BBUs of different base stations are simply stacked together and have no direct link between them to allow physical layer co-ordination. Real-time virtualization capability based on open platform: This is different from traditional base stations built on proprietary hardware, where the software and hardware are close-sourced and provided by single vendors. In contrast, a C-RAN BBU pool is built on open hardware, like x86/ARM CPU based servers, and interface cards that handle fiber links to RRHs and inter-connections in the pool. Real-time virtualization ensures that resources in the pool can be allocated dynamically to base station software stacks, say 4G/3G/2G function modules from different vendors, according to network load. However, to satisfy the strict timing requirements of wireless communication systems, the real-time performance for C-RAN is at the level of tens of microseconds, which is two orders of magnitude better than the millisecond level 'real-time' performance usually seen in Cloud Computing environments. == Similar architecture and systems == KT, a telecom operator in the Republic of Korea, introduced a Cloud Computing Center (CCC) system in their 3G (WCDMA/HSPA) and 4G (LTE/LTE-A) network in 2011 and 2012. The concept of CCC is basically the same as C-RAN. SK Telecom has also deployed Smart Cloud Access Network (SCAN) and Advanced-SCAN in their 4G (LTE/LTE-A) network in Korea no later than 2012. In 2014, Airvana (now CommScope) introduced OneCell, a C-RAN-based small cell system designed for enterprises and public spaces. == Competing architectures in cellular network evolution == === All-in-one BTS === One major alternative solution that is addressing similar challenges of RAN, is the small size, all-in-one outdoor BTS. Thanks to the achievements in the semiconductor industry, all the functionality of a BTS, including RF, baseband processing, MAC processing and package level processing, can now be implemented in a volume of <50 liters. This makes the system small and weatherproof, reduces the difficulty of BTS site choice and construction, eliminates the air conditioning requirement, and thus reduces operational costs. However, because each BTS is still working on its own, it cannot readily make use of the collaboration algorithms to reduce the interference between neighboring BTSs. It is also relatively hard to upgrade or repair because the all-in-one BTS units are usually mounted near the antenna. More processing units in less-protected environments also implies a higher failure rate compared to C-RAN, which only has the RRU deployed outdoors. The advantage of Cloud RAN lies in its ability to implement LTE-Advanced features such as Coordinated MultiPoint (CoMP) with very low latency between multiple radio heads. However, the economic benefit of improvements such as CoMP can be negated by the higher backhaul costs for some operators. === Small cell === The main competition between small cell and C-RAN occurs in two deployment scenarios: outdoor hotspot coverage and indoor coverage. == Academic research and publications == As one of the promising evolution paths for future cellular network architecture, C-RAN has attracted high academic research interest. Meanwhile, because the native support of cooperative radio capability built into the C-RAN architecture, it also enables many advanced algorithms that were hard to implement in cellular networks, including Cooperative Multi-Point Transmission/Receiving, Network Coding, etc. In October 2011, Wireless World Research Forum 27 was hosted in Germany, when China Mobile was invited to give a C-RAN presentation. In August 2012, IEEE C-RAN 2012 workshop was hosted in Kunming, China. CRC Press published a book, "Green Communications: Theore

    Read more →
  • Conservative morphological anti-aliasing

    Conservative morphological anti-aliasing

    Conservative morphological anti-aliasing (CMAA) is an antialiasing technique originally developed by Filip Strugar at Intel. CMAA is an image-based, post processing technique similar to that of morphological antialiasing. CMAA uses 4 main steps which are image analysis for color discontinuities, locally dominant edge detection, simple shape handling, and lastly symmetrical long edge shape handling. A couple of years after CMAA was introduced, Intel unveiled an updated version which they named CMAA2.

    Read more →
  • Pixel binning

    Pixel binning

    Pixel binning, also known as binning, is a process image sensors of digital cameras use to combine adjacent pixels throughout an image, by summing or averaging their values, during or after readout. It improves low-light performance while still allowing for highly detailed photographs in good light. Charge from adjacent pixels in CCD or charge-coupled device image sensors and some other image sensors can be combined during readout, increasing the line rate or frame rate. In the context of image processing, binning is the procedure of combining clusters of adjacent pixels, throughout an image, into single pixels. For example, in 2×2 binning, an array of 4 pixels becomes a single larger pixel, reducing the number of pixels to 1/4 and halving the image resolution in each dimension. The result can be the sum, average, median, minimum, or maximum value of the cluster. Some systems use more advanced algorithms such as considering the values of nearby pixels, edge detection, self-claimed "AI", etc. to increase the perceived visual quality of the final downsized image. This aggregation, although associated with loss of information, reduces the amount of data to be processed, facilitating analysis. The binned image has lower resolution, but the relative noise level in each pixel is generally reduced. == History == Normally, an increase in megapixel count on a constant image sensor size would lead to a sacrifice of the surface size of the individual pixels, which would result in each pixel being able to catch less light in the same time, thus leading to a darker and/or noisier image in low light (given the same exposure time). In the past, camera manufacturers had to compromise between low-light performance and the amount of detail in good light, by dropping the megapixel count like HTC did in 2013 with their four-megapixel "UltraPixel" camera. However, this results in less detailed images in daylight where enough light is available. With pixel binning, the camera has "the best of both worlds", meaning both the benefit of high detail in good light and the benefit of high brightness in low light. In low light, the surfaces of four or more pixels can act as one large pixel that catches far more light. For example, some smartphones such as the Samsung Galaxy A15 are able to capture photographs with up to fifty megapixels in daylight. However, in low light, the individual pixels would be too small to capture the light needed for a bright image with the short exposure time available for handheld shooting. Therefore, with pixel binning activated, the 50-megapixel image sensor acts as a 12.5-megapixel image sensor, a quarter of its original resolution, with an accordingly larger surface area per pixel.

    Read more →
  • Oracle Cloud Platform

    Oracle Cloud Platform

    Oracle Cloud Platform refers to a Platform as a Service (PaaS) offerings by Oracle Corporation as part of Oracle Cloud Infrastructure. These offerings are used to build, deploy, integrate and extend applications in the cloud. The offerings support a variety of programming languages, databases, tools and frameworks including Oracle-specific, open source and third-party software and systems. == Deployment models == Oracle Cloud Platform offers public, private and hybrid cloud deployment models. == Architecture == Oracle Cloud Platform provides both Infrastructure as a Service (IaaS) and Platform as a Service (PaaS). The infrastructure is offered through a global network of Oracle managed data centers. Oracle deploys their cloud in Regions. Inside each Region are at least three fault-independent Availability Domains. Each of these Availability Domains contains an independent data center with power, thermal and network isolation. Oracle Cloud is generally available in North America, EMEA, APAC and Japan with announced South America and US Govt. regions coming soon.

    Read more →
  • Google Cloud Dataflow

    Google Cloud Dataflow

    Google Cloud Dataflow is a fully managed service for executing Apache Beam pipelines within the Google Cloud Platform ecosystem. Dataflow provides a fully managed service for executing Apache Beam pipelines, offering features like autoscaling, dynamic work rebalancing, and a managed execution environment. Dataflow is suitable for large-scale, continuous data processing jobs, and is one of the major components of Google's big data architecture on the Google Cloud Platform. At its core, Dataflow's architecture is designed to abstract away infrastructure management, allowing developers to focus purely on the logic of their data processing tasks. When a pipeline written using the Apache Beam SDK is submitted, Dataflow translates this high-level definition into an optimized job graph. The service then provisions and manages a fleet of Google Compute Engine workers to execute this graph in a highly parallelized and fault-tolerant manner. This serverless approach, combined with intelligent autoscaling of both the number of workers (horizontal) and the resources per worker (vertical), ensures that jobs have the precise amount of computational power needed at any given time, optimizing both performance and cost. The service's deep integration with the Google Cloud ecosystem makes it a powerful tool for a variety of use cases beyond simple data movement. For real-time analytics, Dataflow can ingest unbounded streams of data from Cloud Pub/Sub, perform complex transformations, and load results into BigQuery for immediate querying. In machine learning workflows, it is commonly used to preprocess and transform massive datasets stored in Cloud Storage, preparing them for training models in Vertex AI. This versatility makes it the central processing engine for modern ETL (Extract, Transform, Load) operations, streaming analytics, and large-scale data preparation within the cloud. == History == Google Cloud Dataflow was announced in June, 2014 and released to the general public as an open beta in April, 2015. In January, 2016 Google donated the underlying SDK, the implementation of a local runner, and a set of IOs (data connectors) to access Google Cloud Platform data services to the Apache Software Foundation. The donated code formed the original basis for Apache Beam. In August 2022, there was an incident where user timers were broken for certain Dataflow streaming pipelines in multiple regions, which was later resolved. Throughout 2023 and 2024, there have been various other updates and incidents affecting Google Cloud Dataflow, as documented in the release notes and service health history. The donation of the Dataflow SDK to the Apache Software Foundation was a pivotal moment, establishing Apache Beam as a unified, open-source programming model for defining both batch and streaming data pipelines. This strategic move decoupled the pipeline definition from the execution engine. As a result, developers could write portable data processing logic that was not locked into Google's ecosystem. A Beam pipeline can be executed on various runners, including Apache Flink, Apache Spark, and, of course, the highly optimized Google Cloud Dataflow service, providing flexibility and future-proofing data processing investments. == Features == Google Cloud Dataflow supports both batch and streaming data processing pipelines. It automatically handles resource provisioning, data sharding, and scaling according to workload, reducing manual configuration needed for large-scale data operations. == Use cases == Dataflow is used for ETL (Extract, Transform, Load) data pipelines, real-time analytics, and event stream processing for companies in industries such as finance, advertising, and IoT.

    Read more →
  • NCover

    NCover

    NCover is a .NET code coverage tool. There are two non-related NCover products that do .NET code coverage. There is an open source NCover that can be found on SourceForge and there is a company called NCover, LLC. There has been additional development on both products since this 2004 reference. The company NCover, LLC began when the founder, Peter Waldschmidt, decided to commercialize the open source tool he created. The commercial versions were launched in 2007, but the last supported free version 1.5.8 is still available on the company site.

    Read more →
  • EyeOS

    EyeOS

    eyeOS was a web desktop for cloud computing, whose main purpose is to enable collaboration and communication among users. It is mainly written in PHP, XML, and JavaScript. It is a private-cloud application platform with a web-based desktop interface. eyeOS delivers a whole desktop from the cloud with file management, personal management information tools, and collaborative tools, with the integration of the client's applications. == History == The first publicly available eyeOS version was released on August 1, 2005, as eyeOS 0.6.0 in Olesa de Montserrat, Barcelona (Spain). A worldwide community of developers soon took part in the project and helped improve it by translating, testing, and developing it. After two years of development, the eyeOS Team published eyeOS 1.0 on June 4, 2007. Compared with previous versions, eyeOS 1.0 introduced a complete reorganization of the code and some new web technologies, like eyeSoft, a portage-based web software installation system. Moreover, eyeOS also included the eyeOS Toolkit, a set of libraries allowing easy and fast development of new web applications. With the release of eyeOS 1.1 on July 2, 2007, eyeOS changed its license and migrated from GNU GPL Version 2 to Version 3. Version 1.2 was released just a month after the 1.1 version and integrated full compatibility with Microsoft Word files. eyeOS 1.5 Gala was released on January 15, 2008. This version was the first to support both Microsoft Office and OpenOffice.org file formats for documents, presentations, and spreadsheets. With this version, eyeOS also gained the ability to import and export documents in both formats using server-side scripting. eyeOS 1.6 was released on April 25, 2008, and included many improvements such as synchronization with local computers, drag and drop, a mobile version, and more. eyeOS 1.8 Lars was released on January 7, 2009, and featured a completely rewritten file manager and a new sound API to develop media-rich applications. Later, on April 1, 2009, 1.8.5 was released with a new default theme and some rewritten apps, such as the Word Processor and the Address Book. On July 13, 2009, 1.8.6 was released with an interface for the iPhone and a new version of eyeMail with support for POP3 and IMAP. eyeOS 1.9 was released on December 29, 2009. It was followed up with the 1.9.0.1 release with minor fixes on February 18, 2010. These releases were the last of the "classic desktop" interfaces. A major re-work was completed in March 2010, now called eyeOS 2.x. However, a small group of eyeOS developers still maintain the code within the eyeOS forum, where support is provided, but the eyeOS group itself has stopped active 1.x development. It is now available as the On-eye project on GitHub. Active development was halted on 1.x as of February 3, 2010. eyeOS 2.0 release took place on March 3, 2010. This was a total restructure of the operating system. The 2.x stable is the new series of eyeOS, which is in active development and will replace 1.x as stable in a few months. It includes live collaboration and more social capabilities than eyeOS 1.x. eyeOS then released 2.2.0.0 on July 28, 2010. On December 14, 2010, a working group inside the eyeOS open-source development community began the structure development and further upgrade of eyeOS 1.9.x. The group's main goal is to continue the work eyeOS has stopped on 1.9.x. eyeOS released 2.5 on May 17, 2011. This was the last release under an open source license. It is available on SourceForge for download under another project called eyeOS 2.5 Open Source Version. On April 1, 2014, Telefónica announced their acquisition of eyeOS. eyeOS would maintain its headquarters in the Catalonia, Spain, where their staff would continue to work but now as part of Telefónica. After its integration into Telefónica, eyeOS would continue to function as an independent subsidiary under CEO Michel Kisfaludi. == Structure and API == For developers, EyeOS provides the eyeOS Toolkit, a set of libraries and functions to develop applications for eyeOS. Using the integrated Portage-based eyeSoft system, one can create their own repository for eyeOS and distribute applications through it. Each core part of the desktop is its own application, using JavaScript to send server commands as the user interacts. As actions are performed using AJAX (such as launching an application), it sends event information to the server. The server then sends back tasks for the client to do in XML format, such as drawing a widget. On the server, eyeOS uses XML files to store information. This makes it simple for a user to set up on the server, as it requires zero configuration other than the account information for the first user, making it simple to deploy. To avoid bottlenecks that flat files present, each user's information and settings are stored in different files, preventing resource starvation from occurring, though this in turn may create issues in high volume user environments due to host operating system open file descriptor limits. == Professional edition == A Professional Edition of eyeOS was launched on September 15, 2011, as an operating system for businesses. It uses a new version number and was released under version 1.0 instead of continuing with the next version number in the open source project. The Professional Edition retains the web desktop interface used by the open source version while targeting enterprise users. A host of new features designed for enterprises, like file sharing and synchronization (called eyeSync), Active Directory/LDAP connectivity, system-wide administration controls, and a local file execution tool called eyeRun were introduced. A new suite of Web Apps (a mail client, calendar, instant messaging, and collaboration tools) was also introduced, specific to the enterprise edition for the web desktop. With eyeOS Professional Edition 1.1, a to-do task manager tool, Citrix XenApp integration, and a Facebook like 'wall' for collaboration were introduced. == Awards == 2007 – Received the Softpedia's Pick award. 2007 – Finalist at SourceForge's 2007 Community Choice Awards at the "Best Project" category. The winner for that category was 7-Zip. 2007 – Won the Yahoo! Spain Web Revelation award in the Technology category. 2008 – Finalist for the Webware 100 awards by CNET, under the "Browsing" category. 2008 – Finalist at the SourceForge's 2008 Community Choice Awards at the "Most Likely to Change the World" category. The winner for that category was Linux. 2009 – Selected Project of the Month (August 2009) by SourceForge. 2009 – BMW Innovation Award. 2010 – Winner of Accelera (Ernst & Young). 2010 – Asturias & Girona Spanish Prince award “IMPULSA”. 2011 – Winner of MIT's TR35 award as Innovator of the Year in Spain. == Community == eyeOS community is formed with the eyeOS forums, which reached 10,000 members on April 4, 2008; the eyeOS wiki; and the eyeOS Application Communities, available at the eyeOS-Apps website, hosted and provided by openDesktop.org as well as Softpedia.

    Read more →
  • Tail latency

    Tail latency

    Tail latency is a term used to describe the high-percentile response times seen in a system. This is usually measured at the 95th, 99th, or 99.9th percentile, not the average latency. In distributed systems, cloud computing, and large-scale web services, even a small number of slow requests can make the user experience and system performance much worse. Tail latency often happens because of things like resource contention, network variability, garbage collection pauses, and hardware heterogeneity. A major problem in system design is managing tail latency, because lowering average latency doesn't always make the worst-case performance better. To lessen its effects, people often use techniques like request hedging, replication, load balancing, and adaptive timeouts. In latency-sensitive applications like search engines, financial systems, and real-time services, where service-level objectives (SLOs) are often based on high-percentile latencies, it is especially important to understand and improve tail latency.

    Read more →
  • Tute Genomics

    Tute Genomics

    Tute Genomics was an American genomics startup that provided a cloud-based web application for rapid and accurate annotation of human genomic data. It was built on the expertise of ANNOVAR. Tute Genomics assisted researchers in identifying disease genes and biomarkers, and assisted clinicians/labs in performing genetic diagnosis. Based in Provo, Utah, Tute was co-founded by Dr. Kai Wang, an assistant professor at the University of Southern California (USC); and Dr. Reid J. Robison, a board-certified psychiatrist with fellowship training in both neurodevelopmental genetics and bioinformatics. Tute Genomics was acquired by PierianDX in 2016. == History == The word "tute" means "personal" in the Na’vi language created for the 2009 film Avatar by Paul Frommer, a linguist and communications professor at the USC Marshall School of Business. === Timeline === 2013 Tute Genomics launched in 2013 and entered the accelerator, BoomStartup. By "demo day" of BoomStartup, Tute had raised their seed round of funding and expanded the round to include angel investors from SLC Angels, Park City Angels, Life Science Angels. Tute was the tenth ever online syndicate for AngelList and in all raised a seed round of $1.5 million. 2014 In March 2014, the company announced that Affiliated Genetics, a Utah-based CLIA-certified laboratory, selected Tute Genomics for its next-generation sequencing (NGS) analytics pipeline. In May 2014, the company announced joining the Global Alliance for Genomics and Health. In June 2014, Advanced Biological Laboratories (ABL), S.A., announced a licensing and collaboration agreement with Tute Genomics and the commercial launch of OncoChek for managing and analysing genomics data in the field of oncology. In July 2014, the company announced an agreement with Lineagen, Inc., to provide next-generation sequencing analytics for Lineagen’s NextStepDx Plus assay. Also, Brigham Young University selected the Tute Genomics genome annotation and discovery platform for analysis and interpretation of 1,000 exomes and genomes. In November 2014, the company announced addition of the Tute platform to Illumina’s BaseSpace. The company announced a Series A1 funding round of $2.3 million in December 2014. The round was led by UK-based Eurovestech. Peak Ventures and a number of angel investors also participated in this round. 2015 Tute recruits David Mittelman, founder of Arpeggi, Inc. and former CSO at FamilyTreeDNA, to Tute Genomics as Chief Scientific Officer. Tute acquires Knome and integrates the KnoSys platform into its software product. 2016 Reid Robison, Tute CEO, launches a Kickstarter campaign to sell Tute interpreted whole genome and whole exome sequencing directly to consumers. The campaign was suspended within the same month after receiving a letter from the United States Food and Drug Administration. Tute is acquired by PierianDX.

    Read more →